Indespension SRC6.5/22

Sell your boat, and or any boaty bits cluttering up the garage.
Forum rules
ONCE YOUR ITEM HAS SOLD PLEASE REMOVE/DELETE YOUR POST TO STOP CONFUSION - THANK YOU
Post Reply
EricOnLine
Posts: 10
Joined: Fri Sep 11, 2015 11:48 am

Indespension SRC6.5/22

Post by EricOnLine » Fri Apr 07, 2017 10:39 am

NOW SOLD

For Sale our trailer an Indespension Super Roller Coaster 6.5/22.
Currently configured for our 4Plus2, originally purchased 2008, we have owned for 2 years,

Will be advertising on ebay, gumtree, etc soon, please call me Eric on 07398 938322 if interested

https://www.dropbox.com/s/zzs45vpleq5hq ... r.jpg?dl=0

Indespension specs below

SUPER ROLLER COASTER 6.5/22

Included Options
Spare wheel & carrier
Triplelock anti-theft hitch
All Wheel Brake Flushing Kit
Side Steps

Description

Specification and Features
Gross Vehicle Weight: 2200Kgs
Unladen weight: 640Kgs
Carrying capacity: 1560Kgs
Length capacity: 6.7m
Overall width: 2297mm
Patented Indespension 'SuperRide' braked suspension
Stainless steel brake cables
Twin axle with 165 R13 wheels & tyres
Hot dipped galvanised steel chassis
Winch post inc winch, strap and snubber
Front 16 Roller swing beam assembly
Rear 32 Roller inline ‘Sorrento’ swing beam assembly
Galvanised load bearing mudguards
Adjustable height keel roller and bracket
Jockey wheel
Lighting set (Lighting Board & Lighting Board Arms)
Bearing savers
U- Bolt fixings mean full adjustability in all dimensions thus allowing the perfect set-up for your boat for both launching and retrieving.
Height adjustability through multi-drilled front roller supports
Height adjustability through multi-drilled rear roller angle brackets and cranked swing beam (roller height increases towards outer edge and decreases in the centre)
Soft compound ‘All’ rubber rollers
No scuff or scratch marks on the hull
No risk of losing the ‘outer tyre’ (like other rollers) and scoring hull
Polyurethane sleeve inside roller helps reduce friction and ease ‘roll’
Aluminium support arms which flex as load increases – reduces load on hull
Swing beam supported
Sliding clamp and cross member position (above and below chassis)

Post Reply